Improving the Reliability of Optimised Link State Routing Protocol in Smart Grid’s Neighbour Area Network

A reliable and resilient communication infrastructure that can cope with variable application traffic types and delay objectives is one of the prerequisites that differentiates a Smart Grid from the conventional electrical grid. However, the legacy communication infrastructure in the existing electrical grid is insufficient, if not incapable of satisfying the diverse communication requirements of the Smart Grid. The IEEE 802.11 ad hoc Wireless Mesh Network (WMN) is re-emerging as one of the communication networks that can significantly extend the reach of Smart Grid to backend devices through the Advanced Metering Infrastructure (AMI). However, the unique characteristics of AMI application traffic in the Smart Grid poses some interesting challenges to conventional communication networks including the ad hoc WMN. Hence, there is a need to modify the conventional ad hoc WMN, to address the uncertainties that may exist in its applicability in a Smart Grid environment. This research carries out an in-depth study of the communication of Smart Grid application traffic types over ad hoc WMN deployed in the Neighbour Area Network (NAN). It begins by conducting a critical review of the application characteristics and traffic requirements of several Smart Grid applications and highlighting some key challenges. Based on the reviews, and assuming that the application traffic types use the internet protocol (IP) as a transport protocol, a number of Smart Grid application traffic profiles were developed. Through experimental and simulation studies, a performance evaluation of an ad hoc WMN using the Optimised Link State Routing (OLSR) routing protocol was carried out. This highlighted some capacity and reliability issues that routing AMI application traffic may face within a conventional ad hoc WMN in a Smart Grid NAN. Given the fact that conventional routing solutions do not consider the traffic requirements when making routing decisions, another key observation is the inability of link metrics in routing protocols to select good quality links across multiple hops to a destination and also provide Quality of Service (QoS) support for target application traffic. As with most routing protocols, OLSR protocol uses a single routing metric acquired at the network layer, which may not be able to accommodate different QoS requirements for application traffic in Smart Grid. To address these problems, a novel multiple link metrics approach to improve the reliability performance of routing in ad hoc WMN when deployed for Smart Grid is presented. It is based on the OLSR protocol and explores the possibility of applying QoS routing for application traffic types in NAN based ad hoc WMN. Though routing in multiple metrics has been identified as a complex problem, Multi-Criteria Decision Making (MCDM) techniques such as the Analytical Hierarchy Process (AHP) and pruning have been used to perform such routing on wired and wireless multimedia applications. The proposed multiple metrics OLSR with AHP is used to offer the best available route, based on a number of considered metric parameters. To accommodate the variable application traffic requirements, a study that allows application traffic to use the most appropriate routing metric is presented. The multiple metrics development is then evaluated in Network Simulator 2.34; the simulation results demonstrate that it outperforms existing routing methods that are based on single metrics in OLSR. It also shows that it can be used to improve the reliability of application traffic types, thereby overcoming some weaknesses of existing single metric routing across multiple hops in NAN. The IEEE 802.11g was used to compare and analyse the performance of OLSR and the IEEE 802.11b was used to implement the multiple metrics framework which demonstrate a better performance than the single metric. However, the multiple metrics can also be applied for routing on different IEEE wireless standards, as well as other communication technologies such as Power Line Communication (PLC) when deployed in Smart Grid NAN

Resilient communication for smart grid ubiquitous sensor network:state of the art and prospects for next generation

Smart grid combines a set of functionalities that can only be achieved through ubiquitous sensing and communication across the electrical grid. The communication infrastructure must be able to cope with an increasing number of traffic types which is as a result of increased control and monitoring, penetration of renewable energy sources and adoption of electric vehicles. The communication infrastructure must serve as a substrate that supports different traffic requirements such as QoS (i.e. latency, bandwidth and delay) across an integrated communication system. This engenders the implementation of middleware systems which considers QoS requirements for different types of traffic in order to allow prompt delivery of these traffic in a smart grid system. A heterogeneous communication applied through the adaptation of the Ubiquitous Sensor Network (USN) layered structure to smart grid has been proposed by the International Telecommunication Union (ITU). This paper explores the ITU's USN architecture and presents the communication technologies which can be deployed within the USN schematic layers for a secure and resilient communication together with a study of their pro's and con's, vulnerabilities and challenges. It also discusses the factors that can affect the selection of communication technologies and suggests possible communications technologies at different USN layers. Furthermore, the paper highlights the USN middleware system as an important mechanism to tackle scalability and interoperability problems as well as shield the communication complexities and heterogeneity of smart grid

Multiple metrics-OLSR in NAN for Advanced Metering Infrastructures

Routing in Neighbourhood Area Network (NAN) for Smart Grid's Advanced Metering Infrastructure (AMI) raises the need for Quality of Service (QoS)-Aware routing. This is due to the expanded list of applications that will result in the transmission of different types of traffic between NAN devices (i.e smart meters). In wireless mesh network (WMN) routing, a combination of multiple link metrics, though complex, has been identified as a possible solution for QoS routing. These complexities (i.e Np complete problem) can be resolved through the use of Analytical Hierarchy Process (AHP) algorithm and pruning techniques. With the assumption that smart meters transmit IP packets of different sizes at different interval to represent AMI traffic, a case study of the performance of three Optimised Link State Routing (OLSR) link metrics is carried out on a grid topology NAN based WMN in ns-2 network simulator. The best two performing metric were used to show the possibility of combining multiple metrics with OLSR through the AHP algorithm to fulfill the QoS routing requirements of targeted AMI application traffic in NANs

Performance analysis of variable Smart Grid traffic over ad hoc Wireless Mesh Networks

Recent advances in ad hoc Wireless Mesh Networks (WMN) has posited it as a strong candidate in Smart Grid's Neighbourhood Area Network (NAN) for Advanced Metering Infrastructure (AMI). However, its abysmal capacity and poor multi-hoping performance in harsh dynamic environment will require an improvement to its protocol stacks in order for it to effectively support the variable requirements of application traffic in Smart Grid. This paper presents a classification of Smart Grid traffics and examines the performance of HWMP (which is the default routing protocol of the IEEE 802.11s standard) with the Optimised Link State Routing (OLSR) protocol in a NAN based ad hoc WMN. Results from simulations in ns-3 show that HWMP does not outperform OLSR. This indicates that cross layer modifications can be developed in OLSR protocol to address the routing challenges in a NAN based ad hoc WMN

Performance evaluation of Wireless Mesh Network routing protocol for smart grid networks

Recent Advances in Wireless Mesh Networks (WMN) makes it one of the candidate communication technologies for Smart Grid Automatic Metering Infrastructure (AMI) because of its scalability and low cost of deployment. However, its capacity and multi-hoping performance in dynamic environment may not guarantee resilience and packet delivery reliability requirements of AMI. Theoretical and practical studies have shown that the multi-hoping capacity of a mesh network is constrained by increase in the number of nodes and number of hops in the network. In addition traffic requirements for smart meters will further compound WMN multi-hopping issues. In this paper, the performance of WMN when deployed for AMI is carried out using two wireless routing protocols; Hybrid Wireless Mesh Protocol (HWMP) and Optimised Link State Rout protocol (OLSR) in NS-3. Simulation results show that compared to the reliability requirement of AMI, there is need for improving the routing metric for both protocols. Furthermore, The Dynamic Link Exchange Protocol (DLEP) which allows layer 2 link estimation was proposed to enhance the route decision

VirtElect: A Peer-to-Peer Trading Platform for Local Energy Transactions

An average UK electricity bill is made up of at least 60% service charge, with approximately 22% related to network characteristics including distance charge. This makes distance and network constraints important factors in matching prosumers on any peer-to-peer energy trading platform as assessed in this paper. To realise that, A platform -VirtElect, based on a double auction market is developed to support the matching interaction between prosumers. Case studies based on real microgrid data are used to verify the performance of the platform in demonstrating the potential of local energy consumption. Results show that it is possible to balance local energy generation and consumption, with little or no interaction with the utility grid. We also show that local energy trading is not only beneficial to the environment but also leads to a significant amount of cost savings of up to 45%, depending on the number of participants and their ratios on the platform

Improving the reliability of optimised link state routing in a smart grid neighbour area network based wireless mesh network using multiple metrics

© 2017 by the authors; licensee MDPI. Reliable communication is the backbone of advanced metering infrastructure (AMI). Within the AMI, the neighbourhood area network (NAN) transports a multitude of traffic, each with unique requirements. In order to deliver an acceptable level of reliability and latency, the underlying network, such as the wireless mesh network (WMN), must provide or guarantee the quality-of-service (QoS) level required by the respective application traffic. Existing WMN routing protocols, such as optimised link state routing (OLSR), typically utilise a single metric and do not consider the requirements of individual traffic; hence, packets are delivered on a best-effort basis. This paper presents a QoS-aware WMN routing technique that employs multiple metrics in OLSR optimal path selection for AMI applications. The problems arising from this approach are non deterministic polynomial time (NP)-complete in nature, which were solved through the combined use of the analytical hierarchy process (AHP) algorithm and pruning techniques. For smart meters transmitting Internet Protocol (IP) packets of varying sizes at different intervals, the proposed technique considers the constraints of NAN and the applications' traffic characteristics. The technique was developed by combining multiple OLSR path selection metrics with the AHP algorithm in ns-2. Compared with the conventional link metric in OLSR, the results show improvements of about 23% and 45% in latency and Packet Delivery Ratio (PDR), respectively, in a 25-node grid NAN

CBLSTM-AE: A Hybrid Deep Learning Framework for Predicting Energy Consumption

Multisource energy data, including from distributed energy resources and its multivariate nature, necessitate the integration of robust data predictive frameworks to minimise prediction error. This work presents a hybrid deep learning framework to accurately predict the energy consumption of different building types, both commercial and domestic, spanning different countries, including Canada and the UK. Specifically, we propose architectures comprising convolutional neural network (CNN), an autoencoder (AE) with bidirectional long short-term memory (LSTM), and bidirectional LSTM BLSTM). The CNN layer extracts important features from the dataset and the AE-BLSTM and LSTM layers are used for prediction. We use the individual household electric power consumption dataset from the University of California, Irvine to compare the skillfulness of the proposed framework to the state-of-the-art frameworks. Results show performance improvement in computation time of 56% and 75.2%, and mean squared error (MSE) of 80% and 98.7% in comparison with a CNN BLSTM-based framework (EECP-CBL) and vanilla LSTM, respectively. In addition, we use various datasets from Canada and the UK to further validate the generalisation ability of the proposed framework to underfitting and overfitting, which was tested on real consumers’ smart boxes. The results show that the framework generalises well to varying data and constraints, giving an average MSE of ∼0.09 across all datasets, demonstrating its robustness to different building types, locations, weather, and load distributions

Performance of time-critical smart grid applications in narrow band power line communication

A seamless, sustainable and reliable communication infrastructure is crucial to realise smart grid operations and functionalities. The communications infrastructure in smart grid is not only required to be pervasive, scalable, and secure but also expected to be resilient and guarantee a required Quality of Service (QoS) to an end node. Narrow band power line communications (NBPLC) is believed to be a natural and cost effective choice for smart grid communication because it uses the existing infrastructures of the power grid that is much more extensive and pervasive than any other wired or wireless alternatives. This also eliminates the need for additional wire installation and external subscription for data transfer. However, because most smart grid applications have critical timing requirements, the frequency and time varying characteristics of the power line channel together with its background noise, limited band width and harmonic interference results in unacceptable packet loss during service transmission. Communication solution with Reliable, timely delivery which supports a given QoS for smart grid applications with critical timing requirements will although challenging is highly desirable. This paper investigates the resilience and performance of time critical smart grid application data over power line channels; specifically DLC (Distribution Line Carrier). It was shown that employing RoHC compression scheme on smart grid application IP packets can maximise bandwidth usage and enhance low delay and latency on both uplinks and downlink in a DLC channel